4–20 mA Output
Explore current-output models, including ZP40, ZP50 and selected Z-series transmitters. Compare supply voltage and electrical connections before selecting a model.
Explore Current-Output ModelsZXW Pressure Sensing Solutions
Pressure Transmitters
Explore ZXW pressure transmitters with 4–20 mA or voltage outputs, including flat diaphragm ceramic designs and a range of electrical connections. Compare product series, then share your pressure range, measured media and installation requirements to discuss a suitable model.
- 4–20 mA & Voltage Output Options
- Flat Diaphragm Ceramic Models
- Multiple Electrical Connections
Selecting a model? Share your pressure range, output signal and connection requirements.
Find Your Starting Point
Choose a Pressure Transmitter for Your Requirements
Start with the output signal, sensing design or application you need. Explore the options below, then compare individual models for pressure range, power supply and connection details.
Voltage Output
Browse models with 0.5–4.5 V outputs, including Z2206, ZP102 and Z2296. Check the supply requirements and available pressure ranges for each series.
Explore Voltage-Output ModelsFlat Diaphragm Ceramic Designs
Compare the Z2206 and Z2208 flat diaphragm ceramic series. Review the output signal, installation dimensions and media compatibility for your application.
Explore Flat Diaphragm ModelsApplication-Specific Options
Explore the ZP102 series for air compressors and the Z2286 series for transmission applications. Contact ZXW to confirm specifications for your equipment.
Discuss Your ApplicationThese options may overlap. Confirm the complete specifications of the selected model before ordering.
Explore the Range
Pressure Transmitter Series
Explore flat diaphragm designs and pressure transmitters with different electrical connections. Use the series below to shortlist models, then compare their output signals, supply requirements and pressure ranges.
Flat Diaphragm Ceramic Series
Z2206 / Z2208
Flat diaphragm ceramic designs with voltage or current output, depending on the model.
- Z2206: 0.5–4.5 V output
- Z2208: 4–20 mA output
DIN-Style Connector Series
ZP40 / ZP50
Current-output transmitters with small or large rectangular electrical connectors, depending on the series.
- Output: 4–20 mA
- Supply: 8–30 VDC
PACK Connector Series
Z2296 / Z2298
Explore the Z2296 voltage-output and Z2298 current-output models with PACK electrical connections.
- Z2296: 0.5–4.5 V output
- Z2298: 4–20 mA output
Representative series are shown above. Refer to the model comparison below for additional options. Product images illustrate series appearance; confirm the exact connector and configuration when ordering.
Compare Model Options
Compare Pressure Transmitter Specifications
Compare output signals, power supplies and electrical connections across selected ZXW models. Once you have shortlisted a model, contact us to confirm the pressure range, installation dimensions and specifications for your application.
4–20 mA Output Models
| Model | Output | Supply | Electrical Connection |
|---|---|---|---|
| Z2208 | 4–20 mA | 8–30 VDC | Confirm connection configuration |
| ZP40 | 4–20 mA | 8–30 VDC | Small rectangular connector |
| ZP50 | 4–20 mA | 8–30 VDC | Large rectangular connector |
| Z2298 | 4–20 mA | 8–30 VDC | PACK connector |
Voltage-Output Models
| Model | Output | Supply | Electrical Connection |
|---|---|---|---|
| Z2206 | 0.5–4.5 V | 5 VDC | Three-wire, 3-pin plug |
| Z2296 | 0.5–4.5 V | 5–16 VDC | PACK connector |
Specifications shown are based on the supplied product documents and apply to the listed models. Confirm the exact pressure range, pressure reference type, media compatibility, connector pinout and accuracy conditions before ordering.
Need Help Comparing Models?
Share your pressure range, measured media, available supply voltage and required output signal. ZXW can help review the model options.
Plan Your Installation
Pressure Connections and Electrical Interfaces
Check both the pressure connection and the electrical interface before choosing a transmitter. Share your installation drawing or connector requirements so ZXW can review the configuration for the selected model.
Pressure Connection
Confirm the thread standard, size, sealing method and available installation space. Selected product documents list G1/4, R1/8 or NPT1/4 connections; availability depends on the model.
- Thread standard and size
- Sealing arrangement
- Installation dimensions
Electrical Interface
ZXW product documents include rectangular connectors, PACK connectors, circular connectors and cable leads across different series. Confirm the exact connector, pin assignment and mating harness for your selected model.
- Connector type
- Pin assignment
- Mating connector or harness
Supply and Signal Wiring
Match the transmitter’s supply voltage and output signal to your equipment. Use the wiring diagram for the exact model and configuration rather than assuming that all products share the same wiring.
- Supply voltage
- Output signal
- Model-specific wiring diagram
Application Requirements
Find a Pressure Transmitter for Your Equipment
Start with your equipment’s measurement and installation requirements. ZXW’s product documents identify options for air compressors and transmission applications. Confirm the model specifications against your actual operating conditions.
Air Compressors
ZP102 Series
Explore the ZP102 series for air compressor pressure measurement. Provide your required pressure range, measured media, operating temperature and electrical interface so the configuration can be reviewed.
- Pressure range
- Media and temperature
- Electrical interface
Transmission Systems
Z2286 Series
The Z2286 series is identified for transmission applications. Share the measured fluid, pressure conditions, temperature and installation drawing to discuss the required specifications with ZXW.
- Fluid compatibility
- Pressure and temperature
- Installation dimensions
Other Equipment Requirements
Selecting a transmitter for another type of equipment? Share your operating conditions, output signal and connection requirements so ZXW can review the available model options.
- Operating conditions
- Supply and output
- Mechanical connections
Application suitability depends on the selected model, measured media, seals, pressure conditions and temperature. Confirm these details before ordering.
Selection and Configuration Support
From Application Requirements to Model Selection
Share your application requirements with ZXW to discuss model selection and configuration options. Confirm the technical details before proceeding with sample evaluation or an order.
-
Share Your Requirements
Tell us the measured media, pressure range, operating temperature, supply voltage and output signal you need. Include the expected quantity and any installation drawings.
-
Review Model Options
Discuss available models and identify the specifications that need confirmation, including pressure reference type, accuracy conditions and electrical connections.
-
Confirm the Configuration
Confirm the selected model’s pressure connection, connector pinout, dimensions and wiring. Where a non-standard configuration is requested, its feasibility needs to be reviewed.
-
Plan Evaluation and Ordering
Discuss sample availability, evaluation requirements, quantity and delivery timing. Confirm the agreed specifications and commercial terms before placing an order.
Selection Questions
Pressure Transmitter FAQs
Find answers to common questions about model selection, electrical connections and ordering requirements. For model-specific details, share your application with ZXW.
Discuss Your RequirementsWhat information should I provide to select a pressure transmitter?
Provide the required pressure range and pressure reference type, measured media, media and ambient temperatures, supply voltage, output signal, process connection and electrical interface. Include your accuracy requirements, expected quantity and any installation drawings.
Which ZXW models offer current or voltage outputs?
Current-output options listed in the supplied specifications include Z2208, ZP40, ZP50 and Z2298 with 4–20 mA outputs. Voltage-output options include Z2206 and Z2296 with 0.5–4.5 V outputs. Supply requirements differ by model; refer to the comparison table and confirm the selected configuration with ZXW.
Can the same wiring diagram be used for every model?
No. Wiring depends on the model, output type and connector configuration. Confirm the pin assignment and supply requirements using the wiring diagram for the exact product being ordered. Do not determine wiring from cable colour or product appearance alone.
How do I confirm compatibility with the measured media?
Share the media composition, concentration where relevant, temperature and cleaning conditions. Compatibility needs to be checked against the selected model’s wetted materials and seals. A ceramic sensing element or stainless steel housing alone does not confirm compatibility with every fluid.
How should I compare accuracy specifications?
Compare accuracy figures under the same definition and operating conditions. Some ZXW documents specify combined nonlinearity, repeatability and hysteresis across stated temperature ranges. Confirm the applicable temperature interval and error definition before comparing models.
Can I request a different thread, connector or output signal?
Some product documents list optional or customizable configurations. Send the required thread, connector, output and quantity to ZXW for review. Availability and feasibility must be confirmed for the specific model; options are not interchangeable across all series.
How can I confirm sample availability and delivery timing?
Include the model or application requirements, sample quantity, expected production volume and required delivery date in your inquiry. Sample availability, pricing and lead time should be confirmed after the configuration and order requirements are reviewed.
Discuss Your Application
Request a Pressure Transmitter Quote
Tell us which model you are considering, or share your application requirements. ZXW can review the available options and discuss the specifications needed for your quotation.
For a more specific recommendation, please include:
- Pressure range and pressure reference type
- Measured media and operating temperatures
- Supply voltage and output signal
- Process connection and electrical interface
- Sample quantity or expected order quantity